Product Carousel Tabs
UNI-T Ut675A Battery Tester
UT673A/UT675A battery testers can be used to analyze the battery health of automobile batteries, suitable for battery capacities from 30Ah to 200Ah. These CE-certified testers can rapidly and accurately detect common faults caused by batteries. UT675A also includes USB communication and a built-in printer for report generation
MS6900 – Moisture Tester
Basic Features
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) Brick
Battery Load Tester ? BT 100B
Description
● KEY FEATURES
● Sleek Design Silver Metal Body
● Easy To Use
● Convenient portable size and easy-to-read scales
● Tests batteries on or off the car in just 10 seconds
● Determines good/bad status with an extra-large display with zero adjust
● Determines state-of-charge cranking and charging volts
● Works on both 6 Volts and 12 volts batteries
Soldering Iron Tip Cleaning Solder Steel Wire With Stand BA-222
Features
* Dome design, tin slag will not splash on the table, keep the working environment clean
* Cleans better than conventional sponges.
* Does not cause premature wear of soldering iron tips.
* Best solder tip cleaner brush cleans the soldering tip.
* No contamination risk compared to conventional tip tinners.
Soldering Iron Tip Cleaning Solder Steel Wire With Stand BA-222
Features
* Dome design, tin slag will not splash on the table, keep the working environment clean
* Cleans better than conventional sponges.
* Does not cause premature wear of soldering iron tips.
* Best solder tip cleaner brush cleans the soldering tip.
* No contamination risk compared to conventional tip tinners.
Kyoritsu Kew 8035 Non-Contact Safety Phase Indicator
• New technology permits safe testing, without the need for direct contact between probes and live wires.
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
• The instrument can be fixed to a metal panel via the magnet on the backside.
• Wide measuring range for 3-phase installations from 70V to 1000V AC.
• Super brightness function permits clear LED indication also in the sunshine.
• Complies with IEC 61010-1 CAT IV 600V and CAT III 1000V.
MS6708 Digital Sound Level Meter
Basic Features
● Display 2000 counts
● Auto & Manual Ranging
● Auto Power Off
● Dynamic 50dB
● Frequency 30Hz~8kHz
● Sample Rate 2 times / second
● Fast 125ms / Slow 1 sec
● A / C Weighting
● Display Backlight
● Low Battery Display
● Analog Bar Indication
● Over Range Indication
● MAX
● Data Hold
MS6813 – Multi-Function Cable Tracker
MS6813 is s held network cable tester, ideal for Coaxial Cable (BNC), UTP and STP Cable installation, measurement, maintenance or inspection. it also offers a fast and convenient way of testing telephone line modes greatly simplifying telephone line installation and maintenance
UNI-T Ut675A Battery Tester
UT673A/UT675A battery testers can be used to analyze the battery health of automobile batteries, suitable for battery capacities from 30Ah to 200Ah. These CE-certified testers can rapidly and accurately detect common faults caused by batteries. UT675A also includes USB communication and a built-in printer for report generation
Products Carousel
![](https://ars-pk.com/wp-content/uploads/2018/10/electro-placeholder-blog.png)
![](https://ars-pk.com/wp-content/uploads/2018/10/electro-placeholder-blog.png)
Television Entertainment
Laptops & Computers
Trending Products
Bestsellers
Top Categories this Month
Recommendation for you
Kyoritsu Kew 8035 Non-Contact Safety Phase Indicator
• New technology permits safe testing, without the need for direct contact between probes and live wires.
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
• The instrument can be fixed to a metal panel via the magnet on the backside.
• Wide measuring range for 3-phase installations from 70V to 1000V AC.
• Super brightness function permits clear LED indication also in the sunshine.
• Complies with IEC 61010-1 CAT IV 600V and CAT III 1000V.
MS6708 Digital Sound Level Meter
Basic Features
● Display 2000 counts
● Auto & Manual Ranging
● Auto Power Off
● Dynamic 50dB
● Frequency 30Hz~8kHz
● Sample Rate 2 times / second
● Fast 125ms / Slow 1 sec
● A / C Weighting
● Display Backlight
● Low Battery Display
● Analog Bar Indication
● Over Range Indication
● MAX
● Data Hold
MS6813 – Multi-Function Cable Tracker
MS6813 is s held network cable tester, ideal for Coaxial Cable (BNC), UTP and STP Cable installation, measurement, maintenance or inspection. it also offers a fast and convenient way of testing telephone line modes greatly simplifying telephone line installation and maintenance
UNI-T Ut675A Battery Tester
UT673A/UT675A battery testers can be used to analyze the battery health of automobile batteries, suitable for battery capacities from 30Ah to 200Ah. These CE-certified testers can rapidly and accurately detect common faults caused by batteries. UT675A also includes USB communication and a built-in printer for report generation
MS6900 – Moisture Tester
Basic Features
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) Brick
UNI-T Ut251A High Sensitivity Leakage Current Clamp Meter
UT251 series high-accuracy high sensitivity leakage current clamp meters are designed for testing AC leakage current. These high-resolution meters are great for applications such as checking leakage current for motors, home appliances, and other electrical equipment up to 600A.
UNI-T Ut251C High Sensitivity Leakage Current Clamp Meter
UT251C series high-accuracy sensitivity leakage current clamp meters are designed for testing AC leakage current. These high-resolution meters are great for applications such as checking leakage current for motors, home appliances, and other electrical equipment up to 600A.
Camelion 5 Pcs CR2025 3 Volt Lithium Coin Cell Batteries
Soldering Iron Tip Cleaning Solder Steel Wire With Stand BA-222
Features
* Dome design, tin slag will not splash on the table, keep the working environment clean
* Cleans better than conventional sponges.
* Does not cause premature wear of soldering iron tips.
* Best solder tip cleaner brush cleans the soldering tip.
* No contamination risk compared to conventional tip tinners.