Special Offer
HTC-1 Electronic Temperature Meter (Indoor)
₨450.0-
Battery Tester
UNI-T Ut675A Battery Tester
UT673A/UT675A battery testers can be used to analyze the battery health of automobile batteries, suitable for battery capacities from 30Ah to 200Ah. These CE-certified testers can rapidly and accurately detect common faults caused by batteries. UT675A also includes USB communication and a built-in printer for report generation
SKU: n/a -
Battery Tester
Battery Load Tester ? BT 100B
Description
● KEY FEATURES
● Sleek Design Silver Metal Body
● Easy To Use
● Convenient portable size and easy-to-read scales
● Tests batteries on or off the car in just 10 seconds
● Determines good/bad status with an extra-large display with zero adjust
● Determines state-of-charge cranking and charging volts
● Works on both 6 Volts and 12 volts batteriesSKU: n/a -
-
Bit Cleaner
Soldering Iron Tip Cleaning Solder Steel Wire With Stand BA-222
-
Features
* Dome design, tin slag will not splash on the table, keep the working environment clean
* Cleans better than conventional sponges.
* Does not cause premature wear of soldering iron tips.
* Best solder tip cleaner brush cleans the soldering tip.
* No contamination risk compared to conventional tip tinners.
SKU: n/a -
-
Bit Cleaner
Yihua YH-08B High Rosin Flux Tools Soldering Iron Tip Cleaner
CHARACTERISTIC
High-quality copper clean ball
The clean ball uses high-quality copper, is good at clearing tin, doesn’t touch tin, and is valid clear the iron tips oxidation. The product’s main advantage was protection of the iron tips didn’t blacken, the black iron tips will be
Bright after clear, it makes the iron tips use longer, copper clean balls don’t need to use water clean, it doesn’t down the temperature of solder tips, replace of the sponge, is the lead-free solder tips using a good helper, the soldering iron tips cleaner cleaning effect better than traditional clear sponge. Since it does not contain water, cleaning the tip to maintain tip without loss of heat, it does not cause thermal shock, thereby reducing the loss of the tip.
High-quality rosin
YH-08B soldering iron tip cleaner contains high-quality rosin, good for circuit board soldering. It can rid the iron tips oxidation oxidation oxidation film, to avoid oxidation and reduce surface tension of the little iron tips. The iron tips or the component’s surface have oxidation, is hard to use tin and soldering. Using the iron touch the rosin can quickly rid the oxidation, making the element easy to solder. The rosin is scaling powder, which can help solderingSKU: n/a -
Cell & Batteries
Camelion 5 Pcs CR2025 3 Volt Lithium Coin Cell Batteries
- SPECIFICATIONS: 3 Volts, Lithium, Size: CR2025, H: 0.09in D: 0.79in, 150mAh
- APPLICATIONS: keyless entry, electronic books, locks, glucose monitors, car alarms, key fobs, camera applications, calculators, thermometers, computer equipment, toys, watches, radios
- CROSS REFERENCES: DL2025, ECR2025, NA, BR2025, 208-205, DL20256B, BR2025-1W, CR2025-1W, KCR2025, L12, LM2025, SB-T14, LF1/2V, 5003LC
- NEW PACKAGING: Designed for Safe Storage, Easy Access and safe Shipping
SKU: n/a -
Cell & Batteries
Camelion Battery Charger BC-0904SM
● Compatible for Ni-MH / Ni-Cd AA, AAA or 9V battery 2 independent charging channels
● charge 2 or 4 AA / AAA batteries
● charge 1 or 2 9V batteries
● 2 LED Indicators: turn red when charging in progress or completed
● Low Charging Current Protection
● Reverse Polarity Protection
SKU: n/a
-
Bit Cleaner
Soldering Iron Tip Cleaning Solder Steel Wire With Stand BA-222
-
Features
* Dome design, tin slag will not splash on the table, keep the working environment clean
* Cleans better than conventional sponges.
* Does not cause premature wear of soldering iron tips.
* Best solder tip cleaner brush cleans the soldering tip.
* No contamination risk compared to conventional tip tinners.
SKU: n/a -
-
Battery Tester
UNI-T Ut675A Battery Tester
UT673A/UT675A battery testers can be used to analyze the battery health of automobile batteries, suitable for battery capacities from 30Ah to 200Ah. These CE-certified testers can rapidly and accurately detect common faults caused by batteries. UT675A also includes USB communication and a built-in printer for report generation
SKU: n/a -
Electrical Power Tools
MS6900 – Moisture Tester
Basic Features
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) BrickSKU: n/a -
Electrical Power Tools
UNI-T Ut251A High Sensitivity Leakage Current Clamp Meter
UT251 series high-accuracy high sensitivity leakage current clamp meters are designed for testing AC leakage current. These high-resolution meters are great for applications such as checking leakage current for motors, home appliances, and other electrical equipment up to 600A.
SKU: n/a -
Electrical Power Tools
UNI-T Ut251C High Sensitivity Leakage Current Clamp Meter
UT251C series high-accuracy sensitivity leakage current clamp meters are designed for testing AC leakage current. These high-resolution meters are great for applications such as checking leakage current for motors, home appliances, and other electrical equipment up to 600A.
SKU: n/a -
Cell & Batteries
Camelion Battery Charger BC-0904SM
● Compatible for Ni-MH / Ni-Cd AA, AAA or 9V battery 2 independent charging channels
● charge 2 or 4 AA / AAA batteries
● charge 1 or 2 9V batteries
● 2 LED Indicators: turn red when charging in progress or completed
● Low Charging Current Protection
● Reverse Polarity Protection
SKU: n/a
Products Grid
Best Sellers
Recently Added
Kyoritsu Kew 8035 Non-Contact Safety Phase Indicator
• New technology permits safe testing, without the need for direct contact between probes and live wires.
• Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
• The instrument can be fixed to a metal panel via the magnet on the backside.
• Wide measuring range for 3-phase installations from 70V to 1000V AC.
• Super brightness function permits clear LED indication also in the sunshine.
• Complies with IEC 61010-1 CAT IV 600V and CAT III 1000V.
MS6708 Digital Sound Level Meter
Basic Features
● Display 2000 counts
● Auto & Manual Ranging
● Auto Power Off
● Dynamic 50dB
● Frequency 30Hz~8kHz
● Sample Rate 2 times / second
● Fast 125ms / Slow 1 sec
● A / C Weighting
● Display Backlight
● Low Battery Display
● Analog Bar Indication
● Over Range Indication
● MAX
● Data Hold
MS6813 – Multi-Function Cable Tracker
MS6813 is s held network cable tester, ideal for Coaxial Cable (BNC), UTP and STP Cable installation, measurement, maintenance or inspection. it also offers a fast and convenient way of testing telephone line modes greatly simplifying telephone line installation and maintenance
UNI-T Ut675A Battery Tester
UT673A/UT675A battery testers can be used to analyze the battery health of automobile batteries, suitable for battery capacities from 30Ah to 200Ah. These CE-certified testers can rapidly and accurately detect common faults caused by batteries. UT675A also includes USB communication and a built-in printer for report generation
MS6900 – Moisture Tester
Basic Features
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) Brick
UNI-T Ut251A High Sensitivity Leakage Current Clamp Meter
UT251 series high-accuracy high sensitivity leakage current clamp meters are designed for testing AC leakage current. These high-resolution meters are great for applications such as checking leakage current for motors, home appliances, and other electrical equipment up to 600A.
UNI-T Ut251C High Sensitivity Leakage Current Clamp Meter
UT251C series high-accuracy sensitivity leakage current clamp meters are designed for testing AC leakage current. These high-resolution meters are great for applications such as checking leakage current for motors, home appliances, and other electrical equipment up to 600A.
Camelion 5 Pcs CR2025 3 Volt Lithium Coin Cell Batteries
Soldering Iron Tip Cleaning Solder Steel Wire With Stand BA-222
Features
* Dome design, tin slag will not splash on the table, keep the working environment clean
* Cleans better than conventional sponges.
* Does not cause premature wear of soldering iron tips.
* Best solder tip cleaner brush cleans the soldering tip.
* No contamination risk compared to conventional tip tinners.